How to Make a Beer Keg Tap

Beer taps are mostly made from plastic or glass. Although, bars still use the old fashioned style beer taps. Which is made from wood. Rural initiatives are placing money into trucking companies to make it possible to clean up fallen tress from local areas for small businesses. Four or five trees on a truck are hauled to the mill where they are cut into shape that usually takes a whole day. Commonly, the size of the tap handle is two inch by two inch but it really depends on the keg tap being made. Let’s do the math. Example, the average tree fall has a three foot diameter. It can be cut into eighteen sections. That gives you how many tap handles if there trees are cut down into two by two inches by one foot sections?

The total area of the supposed tree us 1,018 inched, area equals pie times the radius squared. Do not forget that the measurements should be uniform. If you decide to make one inch by one inch, do so, but do the math right. If the area is 1,081 inches that means 254 handles can fit in one section of the tree. That means in an 18 foot tree, 18 sections would give 4,581 tap handles just from one tree. For a four or five truck load, you can make 22,905 tap handles. That’s a pretty good day. Check out this website at http://edition.cnn.com/2006/US/01/19/otr.turbo.tap/index.html?_s=PM:US for more facts about beer keg.

After being cut into shape, they are sent to the tap handles manufacturer. This is not your ordinary operating procedure like other manufacturers of beer tap handles.

There is a software here that they use to allow the manufacturers to keep track of the beer keg tap handle on the computer that shows a complete mock up before it goes to the floor. Some have a software that utilizes the cuts and trims to make it more unique. However, many old school manufacturers put the wood through a series of calculations before cutting them down to size. And just trim off the excess. It will then be ran through a lathe to get it into shape.

Then, painted and lacquered to shine. The last stage is putting labels on each handle. The detailed process always include embedding the label. Only a highly skilled woodworker can create a high quality work. Although, there are ways to make a beer keg tap which technology has already built, making it the old fashioned way makes good craftsmanship, click here to purchase one today!

Guide to Beer Keg Taps

When we have parties or picnics with family and friends, we usually have a beer keg with us. We easily get thirsty so we need a lot of drink, and with a beer keg it could really save us a lot of money on drinks. A keg tap is a device that allows you to release the beer into your drinking cup from the keg. Getting beer from the keg from a tap is not really difficult to do but care must be taken so that the beer will not get wasted if you do not know how to do it correctly. You can splash foam all around or on your face. It looks easy when you see people doing this but it isn’t, really.

The tap regulates the release of beer. There is a lever which you use and you need to pull and press so that the beer will be released. The way it works is to release pressure inside the keg which pushes the beer up and into a glass or a container. Typically, a keg is a switch which may be an on/off switch or an open/close switch.

In connecting the keg with the tap, you first need to place the keg in a stead position for a short while so that the foam it creates will be minimized when pouring. The reason for this is because when there is too much movement when transporting the keg, foam builds up fast. So, let it stay for a while and place the keg where you want to serve the beer to minimize the foam. Remove the cap or seal so that it would be easier to tap. Pros don’t remove the cap or seal since they are already pros and will not put the beer at risk. Remove the cap to play it safe. Then get the tap and line and connect it with the hole at the top of the keg at https://www.quiktap.com/.

Beer kegs can also be tapped with CO2 in a portable system. Kegs receive pressure in a single unit pump and tap combination, which is called the party pump. The beer keg tap is separated from the keg. You need to attach the pump, and the faucet must be opened to release the pressure in the keg. Pumping gives air pressure into the keg, and a push on the level, which is the tap handle that releases beer, go here to know more!

A portable beer keg or a pony keg should be consumed in one day. This is because the beer will lose its flavor when the air is mixed with the beer. An on and off valve is used in traditional keg taps. If you use this, you are serving by gravity and no air pressure is needed. When using a valve, you simply turn to open or close the keg to get some beer. Know more about beer keg at http://www.huffingtonpost.com/2012/04/26/exploding-beer-keg-accident_n_1455480.html.

A Guide to Keg Tap Handles

All of us need time to relax and unwind. Many find it a good idea to go to a restaurant, a local pub or a bar when they want to unwind. When you see their beer keg tap handles at the bar, you might admire it. It might come with a standard one or a personalized style. Whatever style the beer keg tap handle has, you main concern is that it can give you a nice cold glass of beer. It would be great to have a beer keg in your home bar.

Keg tap handles are easy to come by. You can have a simple standard one or a tap handle that looks like a ball, eagle, or dragon. There are a variety of designs that you can choose from. With a beer keg and a great tap handle you don’t have to go to a local bar. You can enjoy you beer in the comforts of your home. You can even drink as much as you want.

For everything to work, you need to have a complete set. You must have the keg, the beer tap, and the beer tap handle. Then you choose the kind of beer you want, the brand that you want to stock in your house. You also need to know that there are many different kinds of beer taps and each type of beer requires a different tap. Learn more about beer tap at https://en.wikipedia.org/wiki/Beer_tap.

If you have the information that you need, you can pick up one in your local liquor store or order from various websites. Choose a design that fits your personality. It is not a problem even if you don’t know what beer you want. As long as you chose the right keg for the right beer, you would be able to enjoy the beer and you can have nice little parties in your house. Click here for additional information!

It is good to purchase your beer keg and tap now so you can invite your friends to a beer party. You can impress them with a great looking beer keg handle and with unlimited supply of beer the whole night through. With this you can be sure that you friends will appreciate having attended your beer party, and you can also encourage them to have their own at home for their owning drinking pleasure.

It is great to have you own beer keg and tap at home so that at the end of each hard working day, you can sit back and relax, watch your favorite movie or sports channel with a glass of cold beer in your hand. Click here for more info!